Pneumatic Forklifts

Pneumatic lifts are often called pallet lift trucks or pump trucks and are extensively used in warehouses and shipping facilities to move resources on pallets. Pneumatic lift trucks include a pair of steel forks mounted on a wheeled counterbalance that has a pump. The pump is used to elevate and lower the blades.

Visually inspect the pallet truck prior to loading. Make sure the wheels are clear of any possible obstructions. What's more, make sure the handle moves smoothly and turns appropriately. Inspect the pallet before moving it to assess if it is stacked in a way that minimizes the possibility of anything falling off during lifting. Discharge any air in the pump and lower the blades to the floor by squeezing the lever mounted on the inside of the steel loop on the end of the lever. Run the forks into the slots in the pallet and make sure the forks are centered so that the pallets’ weight is evenly distributed.

Pump the pneumatic jack handle up and down to elevate the forks from the ground. Discontinue pumping when the pallet is entirely off the ground as there is no need to lift it any higher or risk losing stability while turning. In order to progress the pallet, haul the handle behind you; you should not push it. There will be a large amount of momentum existing. Refrain from quick or sharp turns and you should not stop too swiftly. Gently bring the pallet to a stop where you would like to park it. Squeeze the handle inside the grip end to restore the blades to the ground. Pull out the forks from the pallet and return the pallet lift to its chosen parking spot.

Click to Download the pdf