Forklift Training Program Langley

Forklift Training Program Langley - Lift trucks are occasionally referred to as lift trucks, jitneys or hi los. These powered industrial trucks are utilized widely these days. Department stores utilized forklifts in order to unload products from trailers. Warehouses use them for tiering merchandise. And grocery stores use small models to drop stock in the aisles. Whether loading material at a construction site or transporting lumber at a sawmill, operators of forklifts are needed to be trained correctly and licensed. The priority must be on the safety of the worker and pedestrian. This forklift training program teaches the health and safety rules governing forklifts in order to ensure their safe and efficient utilization.

Forklift Training Program Safety Guidelines:

Forklift training programs are designed to guarantee that the operator is able to control the forklift safely during lifting, tilting and traveling. Only skilled operators should operate a forklift.

When the forklift is in operation; hands, head, arms, feet and legs must be kept inside the forklift. Forklift forks must be kept low to the ground while being slightly tilted back. Observe traffic signs which are posted. Lessen speed and honk the horn when taking a corner. If the vision of the driver is blocked by the load, slowly drive in reverse. Pre-check the ground for possible dangers, such as objects, oily or wet spots, holes, rough patches, vehicles and people. Avoid sudden stops.

If pedestrians pass across the vehicle or moves into a blind spot, the forklift should be stopped, the load lowered, waiting until the way is clear. If a load is being transported on an incline, the forks should be pointed downhill without a load and uphill with a load. The lift truck must just be turned around if on level ground.

Safety guidelines when steering - Never turn the steering wheel sharply if traveling fast. Turn using the rear wheels and support the load by the front wheels. An overloaded truck will be hard to steer. Adhere to load restrictions. Do not add a counterweight in order to improve steering.

Safety tips when loading - Follow the recommended capacity and load limits of the lift truck. This information is displayed on the data plate. Always ensure that the load is positioned according to the recommended load centre. The lift truck would remain stable so long as the load is kept close to the front wheels.

Before inserting the forks into the pallet, the forklift mast must be in an upright position. Level the forks before inserting them.

Click to Download the pdf