Forklift Training Course Langley

Forklift Training Course Langley - Federal and industry regulators have established the criteria for forklift safety training according to their existing regulations and standards. Those wanting to use a forklift should complete a forklift training program prior to utilizing one of these equipment. The accredited Forklift Operator Training Program is intended to provide individuals training with the knowledge and practical skills to become an operator of a forklift.

Vehicle and Mobile Equipment safety regulations that apply to forklift operation involve pre-shift checks, and rules for lifting and loading.

An inspection checklist should be completed and submitted to the supervising authority before starting a shift. When a maintenance problem is uncovered, the use of the specific equipment must be stopped until the issue has been addressed. To be able to indicate the machine is out of service, the keys need to be removed from the ignition and a warning tag placed in a place which is visible.

Loading safety regulations comprise checking the forklift nameplate's rating capacity and determining if the load weight falls within capacity. The forklift forks should be in the downward position when the forklift is starting up. Remember that there is a loss of approximately 100 pounds carrying capacity for every inch further away from the carriage which the load is carried.

Lifting should begin with the driver moving to a stopped position about three inches away from the load. The mast must then be leveled until it has reached a right angle with the load. Raise the forks to one inch below the slot on the pallet and drive forward. Afterward lift forks four inches. Tilt back the load to secure it for moving. Drive the lift backwards if the load obscures frontal vision. Check behind and honk in order to alert other workers. Never allow forks to drag on the ground.

Forklift loads should be loaded in such a way that they are secure and do not create a danger to other objects or people. Restraining loads is needed for materials which can shift during transport and destabilize the forklift.

To be able to prevent the movement of drums, drums can be strapped together to lessen movement. Operators of forklifts must drive slowly when lifting liquids, to lessen instability in the forklift.

Click to Download the pdf