Forklift Training School Langley

Forklift Training School Langley - Reasons Why A Forklift Operator Has to Take A Forklift Training School - Federal and industry regulators have established the criteria for forklift safety training according to their current standards and regulations. People wanting to operate a forklift should finish a forklift training program before working with one of these equipment. The accredited Forklift Operator Training Program is designed to provide trainees with the practical skills and knowledge to become an operator of a forklift.

Vehicle and Mobile Equipment safety rules which apply to forklift operation consist of pre-shift checks, and regulations for lifting and loading.

An inspection checklist must be completed and submitted to the supervising authority prior to beginning a shift. When a maintenance issue is uncovered, the utilization of the specific machinery should be discontinued until the issue has been dealt with. To indicate the machinery is out of service, the keys must be removed from the ignition and a warning tag placed in a visible location.

Loading safety regulations comprise checking the rating capacity on the forklift nameplate and determining if the weight of the load falls within capacity. The forklift forks should be in the down position when the forklift is starting up. Remember that there is a loss of about 100 pounds carrying capacity for every one inch further away from the carriage which the load is carried.

Lifting must begin with the driver moving to a stopped position approximately three inches from the load. The mast should then be leveled until it has reached a right angle with the load. Raise the forks to an inch under the slot on the pallet and drive forward. Next lift forks four inches. Tilt back the load to secure it for moving. Drive the lift backwards if the load obscures frontal vision. Check behind and honk to warn other personnel. Never allow forks to drag on the ground.

Click to Download the pdf